Zum Hauptinhalt wechseln
Hilfe

Kodak Easyshare C813 LCD Replacement

Empfohlene Anleitung

Empfohlene Anleitung

Diese Anleitung wird von den iFixit-Mitarbeitern als außergewöhnlich gut eingestuft.

Replace the LCD in your Kodak Easyshare C813.

This guide demonstrates how to install a LCD.

Abschnitte
Werkzeuge

Schritt 1 LCD  ¶ 

Once the front cover is removed, the battery door maybe closed for convenience. Locate the exposed portion of the LCD screen. Use a wedge to free the LCD screen from the medal housing.

Schritt 1 LCD  ¶ 

  • Once the front cover is removed, the battery door maybe closed for convenience.

  • Locate the exposed portion of the LCD screen.

  • Use a wedge to free the LCD screen from the medal housing.

  • Do not pull the screen away completely, it is still attached to the logic board via the yellow cable.

Schritt 2  ¶ 

Remove the screw at the upper right corner of the metal housing.

Schritt 2  ¶ 

  • Remove the screw at the upper right corner of the metal housing.

Schritt 3  ¶ 

Locate the 2 solder joints holding down the medal housing. Remove the solder. Place wick on solder.

Schritt 3  ¶ 

  • Locate the 2 solder joints holding down the medal housing.

  • Remove the solder.

  • Place wick on solder.

  • Place solder iron on wick

  • The wick should be sandwiched between the iron and the solder.

Schritt 4  ¶ 

Peel back the black tape from the metal housing. Lift the metal housing from the left so that it hinges on its right side. The metal housing is still loosely attached on its right side.

Schritt 4  ¶ 

  • Peel back the black tape from the metal housing.

  • Lift the metal housing from the left so that it hinges on its right side.

  • The metal housing is still loosely attached on its right side.

Schritt 5  ¶ 

Locate black tab holding the LCD screen connector in the port. Use wedge or fingernail to lift the black tab. Pull the the LCD screen connector out of the port.

Schritt 5  ¶ 

  • Locate black tab holding the LCD screen connector in the port.

  • Use wedge or fingernail to lift the black tab.

  • Pull the the LCD screen connector out of the port.