Zum Hauptinhalt wechseln
Hilfe

Canon PowerShot SD870 IS Outer Case Replacement

Replace the outer case.

  • Autor: Zach pelley
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Sehr einfach

How to remove the outer casing of your Canon PowerShot SD870 IS.

Schritt 1 Outer Case  ¶ 

Remove the wrist strap, if present.

Schritt 1 Outer Case  ¶ 

  • Remove the wrist strap, if present.

  • Remove the lithium-ion battery.

Schritt 2  ¶ 

Remove the two 4 mm Phillips #00 screws on the bottom of the camera. Remove the screw next to the wrist strap attachment. Pull up the “A/V OUT DIGITAL” cover and remove the screw above the USB port.

Schritt 2  ¶ 

  • Remove the two 4 mm Phillips #00 screws on the bottom of the camera.

  • Remove the screw next to the wrist strap attachment.

  • Pull up the “A/V OUT DIGITAL” cover and remove the screw above the USB port.

Schritt 3  ¶ 

Carefully unhook the “A/V OUT DIGITAL” cover from the hinge.

Schritt 3  ¶ 

  • Carefully unhook the “A/V OUT DIGITAL” cover from the hinge.

Schritt 4  ¶ 

Pull the front cover from the camera by  using gentle upward pressure. Pull the front cover from the camera by  using gentle upward pressure.

Schritt 4  ¶ 

  • Pull the front cover from the camera by using gentle upward pressure.

Schritt 5  ¶ 

Remove the two Phillips #00 screws from the flat end of the camera. Remove the black L-shaped side cover plate.

Schritt 5  ¶ 

  • Remove the two Phillips #00 screws from the flat end of the camera.

  • Remove the black L-shaped side cover plate.

  • Remove the silver u-shaped retainer plate.

Schritt 6  ¶ 

Slide the back casing off.

Schritt 6  ¶ 

  • Slide the back casing off.