Zum Hauptinhalt wechseln
Hilfe

Toshiba Satellite C655D-S5200 LCD Replacement

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

Here is a Toshiba C655D-S5200 that had a broken case. I did remove the LCD and feel this may be helpful for anybody trying to replace the LCD. Straight forward and not to complicated.

Typical Toshiba and no service manuals available. The LCD on this laptop was removed for other purposes. This is a straight forward task and only requires minimal tools.

Schritt 1 LCD  ¶ 

Here is the Toshiba Satellite C655D-S5200 Open the laptop with the LCD facing forward. There are four rubber caps, one in each corner Removing the plugs reveal the Phillips screws

Schritt 1 LCD  ¶ 

  • Here is the Toshiba Satellite C655D-S5200

  • Open the laptop with the LCD facing forward. There are four rubber caps, one in each corner

  • Removing the plugs reveal the Phillips screws

Schritt 2  ¶ 

Remove all four screws, tow on top left and right corner One on the bottom left corner and the bottom right corner.

Schritt 2  ¶ 

  • Remove all four screws, tow on top left and right corner

  • One on the bottom left corner

  • and the bottom right corner.

  • Here are the four M3x5mm screws

Schritt 3  ¶ 

Use a plastic opening tool, or similar to pop the bezel of the LCD assembly Continue to slide the tool all the way across the top Once the bezel has been released from the tabs, it can be further released be applying some gently manual pulling

Schritt 3  ¶ 

  • Use a plastic opening tool, or similar to pop the bezel of the LCD assembly

  • Continue to slide the tool all the way across the top

  • Once the bezel has been released from the tabs, it can be further released be applying some gently manual pulling

Schritt 4  ¶ 

Continue to pull gently on the sides and finally on the bottom. With all the tabs released the bezel can now be removed.

Schritt 4  ¶ 

  • Continue to pull gently on the sides

  • and finally on the bottom.

  • With all the tabs released the bezel can now be removed.

Schritt 5  ¶ 

Here is the LCD assembly without the bezel Remove the Phillips screw that connects the LCD frame to the back cover. This is the left one Remove the right one as well

Schritt 5  ¶ 

  • Here is the LCD assembly without the bezel

  • Remove the Phillips screw that connects the LCD frame to the back cover. This is the left one

  • Remove the right one as well

Schritt 6  ¶ 

The LCD can now be moved forward and away from the rear cover There are three screws on either side that hold the panel to the frame. Remove those Here are the three M2x4 screws

Schritt 6  ¶ 

  • The LCD can now be moved forward and away from the rear cover

  • There are three screws on either side that hold the panel to the frame. Remove those

  • Here are the three M2x4 screws

Schritt 7  ¶ 

Remove the three Phillips screws on the right side as well. with the screws removed the panel can now be moved out of the LCD frame. The LCD is still connected by the display cable. The display cable is secured to the connector with some clear adhesive. Remove this frist

Schritt 7  ¶ 

  • Remove the three Phillips screws on the right side as well.

  • with the screws removed the panel can now be moved out of the LCD frame. The LCD is still connected by the display cable.

  • The display cable is secured to the connector with some clear adhesive. Remove this frist

Schritt 8  ¶ 

Remove the display cable carefully. With the display cable disconnected, the LCD can now be removed and replaced.

Schritt 8  ¶ 

  • Remove the display cable carefully.

  • With the display cable disconnected, the LCD can now be removed and replaced.