Zum Hauptinhalt wechseln
Hilfe

Automatic Tommy 20 Trigger Spring Replacement

Replace the spring in the trigger of your gun so that you can fire darts.

  • Autor: Moira Foster
  • Geschätzte Zeit: 10 - 15 Minuten
  • Schwierigkeitsgrad: Moderat

You will need to have a #00 Phillips screw driver and a great attitude to replace this important component of your gun! Also, watch out for all the small parts such as the spring itself, they are easy to lose track of! Also cracking the gun open may make you nervous but just take each step one at a time and you will be fine.

Schritt 1 Split the Gun into Two Halves  ¶ 

Grab both sides of the gun and pull forcefully in an upward and outward motion to remove from the light green stock. If this is your first time disassembling your gun, the stock will be glued to each half of the gun's body. To break off the stock from the frame of the gun, you will need to careful wiggle the two halves so that the glue will break apart. The plastic on the gun may break or warp slightly.

Schritt 1 Split the Gun into Two Halves  ¶ 

  • Grab both sides of the gun and pull forcefully in an upward and outward motion to remove from the light green stock.

  • If this is your first time disassembling your gun, the stock will be glued to each half of the gun's body. To break off the stock from the frame of the gun, you will need to careful wiggle the two halves so that the glue will break apart. The plastic on the gun may break or warp slightly.

Schritt 2 Removing the Battery Box  ¶ 

Remove the two 1/16 in. screws attaching the battery box to the frame of the gun using a Phillips #00 Screwdriver. Lift the battery box off the frame of the gun to give yourself access to the trigger mechanism.

Schritt 2 Removing the Battery Box  ¶ 

  • Remove the two 1/16 in. screws attaching the battery box to the frame of the gun using a Phillips #00 Screwdriver.

  • Lift the battery box off the frame of the gun to give yourself access to the trigger mechanism.

Schritt 3 Removing the Screws from the Trigger Mechanism  ¶ 

Remove the two 1/6 in. screws connecting the trigger and trigger spring to the frame of the gun using a Phillips #00 Screwdriver.

Schritt 3 Removing the Screws from the Trigger Mechanism  ¶ 

  • Remove the two 1/6 in. screws connecting the trigger and trigger spring to the frame of the gun using a Phillips #00 Screwdriver.

Schritt 4  ¶ 

Lift the plastic trigger away from the gun  along with the attached spring. Make sure you do not lift the trigger without the spring or the spring may stretch and no longer function properly.

Schritt 4  ¶ 

  • Lift the plastic trigger away from the gun along with the attached spring.

  • Make sure you do not lift the trigger without the spring or the spring may stretch and no longer function properly.