Zum Hauptinhalt wechseln
Hilfe

Automatic Tommy 20 Dart Accelerator Replacement

Replace or fix your dart gun's accelerator near the tip of the gun to keep your darts firing straight and fast!

  • Autor: Reed Garmsen
  • Geschätzte Zeit: 10 - 15 Minuten
  • Schwierigkeitsgrad: Moderat

This guide will help teach you how to remove and replace the motorized accelerator near the the tip of the gun by first disassembling the gun, and then showing removal of the accelerator itself. The guide will require a #00 Phillips head screwdriver and requires you to keep track of a few small parts, but is very doable as long as you follow each step!

Schritt 1 Dart Accelerator  ¶ 

Unscrew the two screws holding the accelerator in place with a Phillips #00 screwdriver Unscrew the two screws holding the accelerator in place with a Phillips #00 screwdriver

Schritt 1 Dart Accelerator  ¶ 

  • Unscrew the two screws holding the accelerator in place with a Phillips #00 screwdriver

Schritt 2 Removing the Accelerator  ¶ 

Pull back on the accelerator away from the plastic to remove from frame.

Schritt 2 Removing the Accelerator  ¶ 

  • Pull back on the accelerator away from the plastic to remove from frame.

  • Be careful to not pull too quickly or too hard to avoid damaging the wiring.