Zum Hauptinhalt wechseln
Hilfe

iPhone 6 Earpiece Speaker Replacement

Replace the earpiece speaker in an iPhone 6.

  • Autor: Sam Goldheart
  • Geschätzte Zeit: 30 Minuten - 1 Stunde
  • Schwierigkeitsgrad: Moderat

If you have to use speakerphone to get audio in a phone call, you may need to replace your earpiece speaker. Use this guide to replace a dead or dying earpiece speaker in your iPhone 6.

You can also use this guide to replace the following parts:

Schritt 1 Earpiece Speaker  ¶ 

Remove the following Phillips screws from the earpiece speaker/front-facing camera bracket:

Schritt 1 Earpiece Speaker  ¶ 

  • Remove the following Phillips screws from the earpiece speaker/front-facing camera bracket:

  • One 2.3 mm screw

  • One 3.0 mm screw

  • One 2.2 mm screw

Schritt 2  ¶ 

Remove the earpiece speaker/front-facing camera bracket from the front panel. Remove the earpiece speaker/front-facing camera bracket from the front panel.

Schritt 2  ¶ 

  • Remove the earpiece speaker/front-facing camera bracket from the front panel.

Schritt 3  ¶ 

Lift the front-facing camera out of its recess in the front panel. Lift the front-facing camera out of its recess in the front panel.

Schritt 3  ¶ 

  • Lift the front-facing camera out of its recess in the front panel.

Schritt 4  ¶ 

Holding the front-facing camera out of the way, remove the earpiece speaker from the front panel. Try not to touch any of the contacts on the speaker or the cable—skin oils can damage them and interrupt the connection. If you touch them by mistake, clean them with a little isopropyl alcohol and give them a few moments to air dry.

Schritt 4  ¶ 

  • Holding the front-facing camera out of the way, remove the earpiece speaker from the front panel.

  • Try not to touch any of the contacts on the speaker or the cable—skin oils can damage them and interrupt the connection. If you touch them by mistake, clean them with a little isopropyl alcohol and give them a few moments to air dry.