Zum Hauptinhalt wechseln
Hilfe

Sun King Solo Solar Lantern Battery Replacement

This guide will walk you through replacing the battery.

  • Autor: Anna
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Einfach

All that is needed to replace the battery is a screwdriver.

Abschnitte
Werkzeuge

Schritt 1 Isolate the Battery  ¶ 

Locate the battery. Gently lift the battery from the device.

Schritt 1 Isolate the Battery  ¶ 

  • Locate the battery.

  • Gently lift the battery from the device.

Schritt 2 Remove the Battery  ¶ 

Locate the clip attaching the battery pack to the circuit board.

Schritt 2 Remove the Battery  ¶ 

  • Locate the clip attaching the battery pack to the circuit board.

  • Use tweezers to remove the portion of the clip attached to the battery.

  • Do not pull directly on the wires! They can easily be damaged.

Schritt 3 Replace the Battery  ¶ 

Align the black wire of the new battery towards the center of the device.

Schritt 3 Replace the Battery  ¶ 

  • Align the black wire of the new battery towards the center of the device.

  • Press down firmly on the clip to insure that it is properly connected.

  • Properly dispose of the Lithium-Ion Battery. Lithium Battery Disposal

Schritt 4 Reseat the Battery  ¶ 

Seat the battery in the orange component so that the short end of the battery pack is  touching the foam bumper.

Schritt 4 Reseat the Battery  ¶ 

  • Seat the battery in the orange component so that the short end of the battery pack is touching the foam bumper.