Zum Hauptinhalt wechseln
Hilfe

Planet Eclipse Etha Battery and Grip Panels Replacement

This guide focuses on how to remove and replace the Battery and Grip Panels on your Planet Eclipse Etha.

  • Autor: Jared Olson
  • Geschätzte Zeit: 5 Minuten
  • Schwierigkeitsgrad: Einfach

Removing the grip panels allows you to change the battery and allows you to remove the frame, which gives access to more parts of the marker.

Werkzeuge

Schritt 1 Battery and Grip Panels  ¶ 

Use the 5/64" hex key to remove the screw shown. Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

Schritt 1 Battery and Grip Panels  ¶ 

  • Use the 5/64" hex key to remove the screw shown.

  • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

  • If you are only replacing the battery, skip the next step.

  • The screws in this guide are interchangeable with those shown in the Eyes replacement guide.

Schritt 2  ¶ 

Flip the marker over and use the 5/64" hex key to remove the screw shown.

Schritt 2  ¶ 

  • Flip the marker over and use the 5/64" hex key to remove the screw shown.

  • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

Schritt 3  ¶ 

Carefully remove the 9V battery and connector. Remove the 9V battery from the connector.

Schritt 3  ¶ 

  • Carefully remove the 9V battery and connector.

  • Remove the 9V battery from the connector.