Zum Hauptinhalt wechseln
Hilfe

Xbox 360 Wireless Controller Vibration Motors Replacement

Left and right vibrator motor replacement.

Put some feeling back in your gameplay by replacing the vibrator motors in your Xbox 360 wireless controller.

Abschnitte

Schritt 1 Vibration Motors  ¶ 

Use the flat end of a spudger to remove the vibration motor cable, moving it upward from its socket on the logic board. Lift the vibration motor out of the front case.

Schritt 1 Vibration Motors  ¶ 

  • Use the flat end of a spudger to remove the vibration motor cable, moving it upward from its socket on the logic board.

  • Lift the vibration motor out of the front case.

Schritt 2  ¶ 

Remove the vibration motor from the other side of the controller using the same method previously described. The right motor has significantly more counterweight than the left motor.

Schritt 2  ¶ 

  • Remove the vibration motor from the other side of the controller using the same method previously described.

  • The right motor has significantly more counterweight than the left motor.