Zum Hauptinhalt wechseln
Hilfe

Huawei Ascend W1 Speaker Replacement

Bessere Einleitung

Bessere Einleitung

Verbessere diese Anleitung, indem du die Einleitung vervollständigst oder überarbeitest.

Broken speaker? Use this guide to help you remove and replace the speaker in your device.

  • Autor: Jaie Hillery
  • Geschätzte Zeit: 15 - 30 Minuten
  • Schwierigkeitsgrad: Moderat
Abschnitte
Werkzeuge

Schritt 1 Remove all the screws  ¶ 

After removing the battery, you will need to remove the screws holding the phone's middle cover. There are eleven screws that hold the plate to the rest of the phone.

Schritt 1 Remove all the screws  ¶ 

  • After removing the battery, you will need to remove the screws holding the phone's middle cover.

  • There are eleven screws that hold the plate to the rest of the phone.

  • The screw that is marked by the orange circle is covered by a white dot. It is used as a tampering deterrent.

Schritt 2 Removing the lower circuit plate  ¶ 

After all the screws are removed from the back circuit, use your fingers to remove the lower section of the middle cover. Grab the top of the lower middle cover and pull it outward towards you, exposing the circuit board underneath.

Schritt 2 Removing the lower circuit plate  ¶ 

  • After all the screws are removed from the back circuit, use your fingers to remove the lower section of the middle cover.

  • Grab the top of the lower middle cover and pull it outward towards you, exposing the circuit board underneath.

Schritt 3 Removing the rest of the middle cover.  ¶ 

Begin working your way around the sides of the middle cover, unsnapping it gently. Be gentle as you pry the middle cover off. The parts may break if you are too forceful.

Schritt 3 Removing the rest of the middle cover.  ¶ 

  • Begin working your way around the sides of the middle cover, unsnapping it gently.

  • Be gentle as you pry the middle cover off. The parts may break if you are too forceful.

Schritt 4 Removing the speaker  ¶ 

The speaker is attached to the inside of the back cover and visible once the middle cover is removed. Using small pliers, gently remove the speaker. The speaker may be difficult to remove due to the adhesive that keeps it in place.

Schritt 4 Removing the speaker  ¶ 

  • The speaker is attached to the inside of the back cover and visible once the middle cover is removed.

  • Using small pliers, gently remove the speaker.

  • The speaker may be difficult to remove due to the adhesive that keeps it in place.