Zum Hauptinhalt wechseln
Hilfe

iPad Mini 3 Wi-Fi LCD Replacement

Replace the LCD in an iPad Mini 3.

  • Autor: Sam Goldheart
  • Geschätzte Zeit: 1 - 2 Stunden
  • Schwierigkeitsgrad: Schwierig

Use this guide to open your iPad Mini 3 and replace the display.

Schritt 1 LCD  ¶ 

Remove the following Phillips #00 screws from the display cable bracket:

Schritt 1 LCD  ¶ 

  • Remove the following Phillips #00 screws from the display cable bracket:

  • One 2.8 mm screw

  • Three 1.4 mm screws

Schritt 2  ¶ 

Remove the display cable bracket from the iPad. Remove the display cable bracket from the iPad. Remove the display cable bracket from the iPad.

Schritt 2  ¶ 

  • Remove the display cable bracket from the iPad.

Schritt 3  ¶ 

Use the tip of a spudger to lift the home button cable up off of its socket on the logic board. Fold the home button ribbon cable out of the way. Fold the home button ribbon cable out of the way.

Schritt 3  ¶ 

  • Use the tip of a spudger to lift the home button cable up off of its socket on the logic board.

  • Fold the home button ribbon cable out of the way.

Schritt 4  ¶ 

Use the tip of a spudger to gently lift the battery connector up off its socket on the logic board. Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely. Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.

Schritt 4  ¶ 

  • Use the tip of a spudger to gently lift the battery connector up off its socket on the logic board.

  • Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.

Schritt 5  ¶ 

Use the tip of a spudger to lift the LCD connector up off its socket on the logic board. Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.

Schritt 5  ¶ 

  • Use the tip of a spudger to lift the LCD connector up off its socket on the logic board.

  • Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.

Schritt 6  ¶ 

Lift and remove the LCD from the iPad Mini 3.

Schritt 6  ¶ 

  • Lift and remove the LCD from the iPad Mini 3.