Zum Hauptinhalt wechseln
Hilfe

Nokia X Display Assembly Replacement

By following this guide, you will learn how to open up the device and unhook the screen from the motherboard.

  • Autor: Avery Dorsey
  • Geschätzte Zeit: 10 - 15 Minuten
  • Schwierigkeitsgrad: Moderat

Use this guide to replace the entire display assembly on your Nokia X.

Abschnitte
Werkzeuge

Schritt 1 Display Assembly  ¶ 

Remove the four 5.33mm T5 Torx screws which are located in the corners of the phone. Remove the seven 4.00mm T5 Torx screws that line the phone between the corners.

Schritt 1 Display Assembly  ¶ 

  • Remove the four 5.33mm T5 Torx screws which are located in the corners of the phone.

  • Remove the seven 4.00mm T5 Torx screws that line the phone between the corners.

Schritt 2  ¶ 

To remove the screen from the motherboard, you will need to apply some force until you feel it snap off. If the connectors unhook themselves, don't worry. To remove the screen from the motherboard, you will need to apply some force until you feel it snap off. If the connectors unhook themselves, don't worry.

Schritt 2  ¶ 

  • To remove the screen from the motherboard, you will need to apply some force until you feel it snap off. If the connectors unhook themselves, don't worry.

Schritt 3  ¶ 

If the connectors are still attached, simply unhook them by lifting the top of the connector with your finger.

Schritt 3  ¶ 

  • If the connectors are still attached, simply unhook them by lifting the top of the connector with your finger.