Zum Hauptinhalt wechseln
Hilfe

Sony Cyber-shot DSC-W290 LCD Assembly Replacement

Grammatikfehler

Grammatikfehler

Wecke den Deutschlehrer in dir und hilf, die Grammatik dieser Anleitung zu verbessern!

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

This guide is shows you how to replace the Sony Cyber-shot DSC-W290's LCD screen.

  • Autor: Evan Mayer
  • Geschätzte Zeit: 20 Minuten
  • Schwierigkeitsgrad: Moderat

This guide will teach you how to replace the Sony Cyber-shot DSC-W290's LCD screen.

Abschnitte
Werkzeuge

Schritt 1 LCD Assembly  ¶ 

Gently pull the LCD and its casing away from the motherboard as shown.

Schritt 1 LCD Assembly  ¶ 

  • Gently pull the LCD and its casing away from the motherboard as shown.

  • Be careful not to rip out any ribbon cables.

Schritt 2  ¶ 

Disconnect the small ribbon-wire by gently pulling on the small ribbon-wire where it connects with the motherboard. Do not use excessive force to remove the wire because this may cause it to tear.

Schritt 2  ¶ 

  • Disconnect the small ribbon-wire by gently pulling on the small ribbon-wire where it connects with the motherboard.

  • Do not use excessive force to remove the wire because this may cause it to tear.

Schritt 3  ¶ 

Disconnect the large ribbon-wire by pulling on the large ribbon-wire where it connects to the motherboard. Disconnect the large ribbon-wire by pulling on the large ribbon-wire where it connects to the motherboard.

Schritt 3  ¶ 

  • Disconnect the large ribbon-wire by pulling on the large ribbon-wire where it connects to the motherboard.

Schritt 4  ¶ 

Pull the LCD and its casing away from the rest of the camera.

Schritt 4  ¶ 

  • Pull the LCD and its casing away from the rest of the camera.