Zum Hauptinhalt wechseln
Hilfe

ComNet Ericsson Panther 600P Display Replacement

This guide will show you how to replace a non responsive or damaged screen.

  • Autor: Daniel
  • Geschätzte Zeit: 10 - 15 Minuten
  • Schwierigkeitsgrad: Moderat

With a few tools, a little bit of time, and a moderate degree of commitment, you can replace a damaged display on ComNet Ericsson Panther 600P.

Abschnitte
Werkzeuge

Schritt 1 Front Case - Internal  ¶ 

Using the plastic opening tool, pry the case apart. Using the plastic opening tool, pry the case apart. Using the plastic opening tool, pry the case apart.

Schritt 1 Front Case - Internal  ¶ 

  • Using the plastic opening tool, pry the case apart.

Schritt 2 Ribbon  ¶ 

The keypad chip is attached to the motherboard by a ribbon. Pull ribbon with tweezers to detach from back panel.

Schritt 2 Ribbon  ¶ 

  • The keypad chip is attached to the motherboard by a ribbon.

  • Pull ribbon with tweezers to detach from back panel.

Schritt 3 Screen  ¶ 

Screen will be attached by a ribbon. Pull screen up and away from motherboard to detach. Pull screen up and away from motherboard to detach.

Schritt 3 Screen  ¶ 

  • Screen will be attached by a ribbon.

  • Pull screen up and away from motherboard to detach.