Zum Hauptinhalt wechseln
Hilfe

Sony Cyber-shot DSC-W290 Lens Assembly Replacement

Grammatikfehler

Grammatikfehler

Wecke den Deutschlehrer in dir und hilf, die Grammatik dieser Anleitung zu verbessern!

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

This guide describes how to install or replace the Lens Assembly for the Sony Cyber-shot DSC-W290.

  • Autor: William Schill
  • Geschätzte Zeit: 35 Minuten
  • Schwierigkeitsgrad: Moderat

To remove the Lens assembly, you must have background knowledge about disassembling the camera. (See previous guides)

Abschnitte

Schritt 1 Lens Assembly  ¶ 

Flash capacitors are dangerous! Be extremely careful when removing the capacitor from the camera. You can get shocked BADLY! Remove the flash capacitor from the lens assembly. Carefully place the flash capacitor away from where you are working.

Schritt 1 Lens Assembly  ¶ 

  • Flash capacitors are dangerous! Be extremely careful when removing the capacitor from the camera. You can get shocked BADLY!

  • Remove the flash capacitor from the lens assembly.

  • Carefully place the flash capacitor away from where you are working.

Schritt 2  ¶ 

Carefully disconnect the top ribbon-wire from the motherboard by pulling where the wire connects to the motherboard. Carefully disconnect the top ribbon-wire from the motherboard by pulling where the wire connects to the motherboard. Carefully disconnect the top ribbon-wire from the motherboard by pulling where the wire connects to the motherboard.

Schritt 2  ¶ 

  • Carefully disconnect the top ribbon-wire from the motherboard by pulling where the wire connects to the motherboard.

Schritt 3  ¶ 

Disconnect the top remaining ribbon-wire by carefully pulling at the base of where the wire connects to the motherboard. Disconnect the top remaining ribbon-wire by carefully pulling at the base of where the wire connects to the motherboard. Disconnect the top remaining ribbon-wire by carefully pulling at the base of where the wire connects to the motherboard.

Schritt 3  ¶ 

  • Disconnect the top remaining ribbon-wire by carefully pulling at the base of where the wire connects to the motherboard.

Schritt 4  ¶ 

Pull the Lens Assembly away from the motherboard. You have now removed the Lens Assembly from the camera. You have now removed the Lens Assembly from the camera.

Schritt 4  ¶ 

  • Pull the Lens Assembly away from the motherboard.

  • You have now removed the Lens Assembly from the camera.