Zum Hauptinhalt wechseln
Hilfe

Motorola V557 Rear Casing Replacement

Unklarer Text

Unklarer Text

Teile des Textes dieser Anleitung sind verwirrend, doppelt oder vom Thema abweichend. Kläre das, indem du sie bearbeitest!

Fehler in den Markups

Fehler in den Markups

Diese Anleitung benötigt bessere Markups. Hilf aus, indem du sie korrigierst oder einige Markup-Anmerkungen erstellst.

This guide will show how to separate out the pieces of the lower case to access the logic board, keypad, headphone jack and external speaker.

  • Autor: Alex Georges
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Moderat

This section will show how to separate the pieces of the main case to reveal the internal components.

Abschnitte

Schritt 1 Rear Casing  ¶ 

Remove the screw covers over the two top screws by prying gently with a pin. The large cover in the upper left of the back plate has no screw behind it, so should not be removed. The large cover in the upper left of the back plate has no screw behind it, so should not be removed.

Schritt 1 Rear Casing  ¶ 

  • Remove the screw covers over the two top screws by prying gently with a pin.

  • The large cover in the upper left of the back plate has no screw behind it, so should not be removed.

Schritt 2  ¶ 

Remove all four 6.0 mm Torx screws. Remove all four 6.0 mm Torx screws. Remove all four 6.0 mm Torx screws.

Schritt 2  ¶ 

  • Remove all four 6.0 mm Torx screws.

Schritt 3  ¶ 

Insert a spudger into marked holes, one at a time, and pry away from the phone to release internal tabs. Separate and detach the rear casing. Separate and detach the rear casing.

Schritt 3  ¶ 

  • Insert a spudger into marked holes, one at a time, and pry away from the phone to release internal tabs.

  • Separate and detach the rear casing.