Zum Hauptinhalt wechseln
Hilfe

Sega CD Plastic Housing Removal

Empfohlene Anleitung von Studenten

Empfohlene Anleitung von Studenten

Diese Anleitung ist das Werk unserer herausragenden Studenten und wird von den iFixit-Mitarbeitern als außergewöhnlich gut eingestuft.

This repair guide will take you through the process of removing the plastic Sega casing so to open up the console for further repair.

  • Autor: Ryan Kotzebue
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Einfach

The purpose of this replacement guide is to remove the Sega plastic casing to expose the internal content for further repair.

Schritt 1 Sega CD Plastic Housing Removal  ¶ 

Using a Phillips head screwdriver remove  six screws from the bottom of the console. The six screws are marked.

Schritt 1 Sega CD Plastic Housing Removal  ¶ 

  • Using a Phillips head screwdriver remove six screws from the bottom of the console.

  • The six screws are marked.

Schritt 2  ¶ 

Remove the two screws that attach the Genesis' connector to the rest of the console.

Schritt 2  ¶ 

  • Remove the two screws that attach the Genesis' connector to the rest of the console.

  • The two screws are marked in the diagram.

Schritt 3  ¶ 

Slide the lock tab to the left to separate the halves of the console.

Schritt 3  ¶ 

  • Slide the lock tab to the left to separate the halves of the console.

Schritt 4  ¶ 

Lift from the left side to remove the top of the case.

Schritt 4  ¶ 

  • Lift from the left side to remove the top of the case.

Schritt 5  ¶ 

Using the spudger, pry the cover off of the Genesis attachment.

Schritt 5  ¶ 

  • Using the spudger, pry the cover off of the Genesis attachment.

Schritt 6  ¶ 

Lift the top of the case to remove the cover.

Schritt 6  ¶ 

  • Lift the top of the case to remove the cover.

Schritt 7  ¶ 

Remove the faceplate by pulling it up, then out.

Schritt 7  ¶ 

  • Remove the faceplate by pulling it up, then out.