Zum Hauptinhalt wechseln
Hilfe

iPhone 1st Generation Front Bezel Replacement

Replacing the metal bezel in a 1st Gen iPhone.

  • Autor: iRobot
  • Schwierigkeitsgrad: Sehr schwierig

Use this guide to replace the metal ring around the display.

Abschnitte
Werkzeuge

Schritt 1 Front Bezel  ¶ 

Remove the three Phillips #00 screws securing the front bezel to the iPhone.

Schritt 1 Front Bezel  ¶ 

  • Remove the three Phillips #00 screws securing the front bezel to the iPhone.

Schritt 2  ¶ 

Rotate the iPhone 90 degrees and remove the two Phillips #00 screws from the bottom of the iPhone.

Schritt 2  ¶ 

  • Rotate the iPhone 90 degrees and remove the two Phillips #00 screws from the bottom of the iPhone.

Schritt 3  ¶ 

Rotate the iPhone 90 degrees and remove the three Phillips #00 screws from the side of the iPhone.

Schritt 3  ¶ 

  • Rotate the iPhone 90 degrees and remove the three Phillips #00 screws from the side of the iPhone.

Schritt 4  ¶ 

Rotate the iPhone 90 degrees and remove the two Phillips #00 screws from the top of the iPhone.

Schritt 4  ¶ 

  • Rotate the iPhone 90 degrees and remove the two Phillips #00 screws from the top of the iPhone.

Schritt 5  ¶ 

Lift the front bezel away from the iPhone.

Schritt 5  ¶ 

  • Lift the front bezel away from the iPhone.