Zum Hauptinhalt wechseln
Hilfe

Samsung Galaxy S6 Power Button Replacement

Replace the power button cover and switch on your Samsung Galaxy S6.

  • Autor: Evan Noronha
  • Geschätzte Zeit: 45 Minuten
  • Schwierigkeitsgrad: Moderat

Use this guide to replace the power button on your Samsung Galaxy S6.

This guide involves removing the rear glass. Removing the rear glass destroys the adhesive holding it in place. Follow this guide to reinstall the rear glass.

Abschnitte
Werkzeuge

Schritt 1 Power Button  ¶ 

Using the angled tweezers, grip the power button bracket and pull it out of its socket. Only remove the power button bracket from the socket. The ribbon cable is still attached to the midframe and will rip if you pull too hard.

Schritt 1 Power Button  ¶ 

  • Using the angled tweezers, grip the power button bracket and pull it out of its socket.

  • Only remove the power button bracket from the socket. The ribbon cable is still attached to the midframe and will rip if you pull too hard.

Schritt 2  ¶ 

Pull up lightly on the power button ribbon cable until only the the spring contacts are still adhered to the midframe. Do not attempt to pull the entire assembly up from the power button bracket. The adhesive on the spring contacts is stronger than the cable's.

Schritt 2  ¶ 

  • Pull up lightly on the power button ribbon cable until only the the spring contacts are still adhered to the midframe.

  • Do not attempt to pull the entire assembly up from the power button bracket. The adhesive on the spring contacts is stronger than the cable's.

Schritt 3  ¶ 

Insert the pointed edge of the spudger under the power button contact points. Press to  pry up the connector. Press to  pry up the connector.

Schritt 3  ¶ 

  • Insert the pointed edge of the spudger under the power button contact points.

  • Press to pry up the connector.

Schritt 4  ¶ 

Remove the power button bracket assembly.

Schritt 4  ¶ 

  • Remove the power button bracket assembly.

Schritt 5  ¶ 

Use the pointed end of the spudger to push the power button out of the midframe. Use the pointed end of the spudger to push the power button out of the midframe.

Schritt 5  ¶ 

  • Use the pointed end of the spudger to push the power button out of the midframe.

Schritt 6  ¶ 

Use tweezers to remove the power button.

Schritt 6  ¶ 

  • Use tweezers to remove the power button.