Zum Hauptinhalt wechseln
Hilfe

Sony Cyber-shot DSC-P52 Outer Case Replacement

This guide explains the procedure to remove the case from the Sony Cybershot DSC-P52.

  • Autor: Trevor
  • Geschätzte Zeit: 2 - 10 Minuten
  • Schwierigkeitsgrad: Moderat

This guide is used for taking apart the case to fix many of the issues of the Sony Cybershot DSC-P52.

Schritt 1 Outer Case  ¶ 

Open the battery compartment and remove the batteries.

Schritt 1 Outer Case  ¶ 

  • Open the battery compartment and remove the batteries.

  • Remove all of the visible screws on the outside of the case.

  • There should be three of them that are all easily located.

Schritt 2  ¶ 

Open the memory card compartment.

Schritt 2  ¶ 

  • Open the memory card compartment.

  • Remove the screw next to the memory card slot.

Schritt 3  ¶ 

Pull apart the front and back cover pieces carefully.

Schritt 3  ¶ 

  • Pull apart the front and back cover pieces carefully.

  • The front cover should come completely free with little effort.

  • The back cover will still be attached to the circuit board.

Schritt 4  ¶ 

Simultaneously unclip all of the clips holding in the circuitry. Remove the back case.

Schritt 4  ¶ 

  • Simultaneously unclip all of the clips holding in the circuitry. Remove the back case.

  • The circuitry will still be connected to the back case by ribbon cables.

Schritt 5  ¶ 

Open the case as shown.

Schritt 5  ¶ 

  • Open the case as shown.

Schritt 6  ¶ 

Unclip the clip holding the ribbon cable in.

Schritt 6  ¶ 

  • Unclip the clip holding the ribbon cable in.

  • Other ribbon cables might not have a clips.

Schritt 7  ¶ 

Pull the ribbon cable out.

Schritt 7  ¶ 

  • Pull the ribbon cable out.