Zum Hauptinhalt wechseln
Hilfe

Kolcraft Cloud Plus Wheel Replacement

This guide briefly describes the process of removing and replacing a wheel on the Kolcraft Cloud Plus stroller.

The wheels are vital to the stroller's function. Damaged or loose wheels can be frustrating, but wheel replacement is quick and painless.

Werkzeuge

Schritt 1 Wheel  ¶ 

Applying too much force to the spudger can cause the spudger to bend or the hubcap to break. To avoid this, try prying the hubcap from a different angle or positioning your spudger at a different points around the hubcap. Use the spaded side of the metal spudger to pry off the small black hubcap on the     outside of the rear wheel.

Schritt 1 Wheel  ¶ 

  • Applying too much force to the spudger can cause the spudger to bend or the hubcap to break. To avoid this, try prying the hubcap from a different angle or positioning your spudger at a different points around the hubcap.

  • Use the spaded side of the metal spudger to pry off the small black hubcap on the outside of the rear wheel.

Schritt 2  ¶ 

Pull on the looped end of the cotter pin to remove it. Pull on the looped end of the cotter pin to remove it.

Schritt 2  ¶ 

  • Pull on the looped end of the cotter pin to remove it.

Schritt 3  ¶ 

Remove the metal washer by sliding it off the axle. Remove the metal washer by sliding it off the axle.

Schritt 3  ¶ 

  • Remove the metal washer by sliding it off the axle.

Schritt 4  ¶ 

Slide the wheel off of the axle.

Schritt 4  ¶ 

  • Slide the wheel off of the axle.