Zum Hauptinhalt wechseln
Hilfe

MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement

Replace the hard drive in your Early 2011 MacBook Pro 13" Unibody.

  • Autor: Andrew Bookholt
  • Geschätzte Zeit: 30 - 45 Minuten
  • Schwierigkeitsgrad: Moderat

Use this guide to replace a dead hard drive.

Abschnitte
Werkzeuge
Relevante Ersatzteile
Relevante Ersatzteile (fortgesetzt)

Schritt 1 Hard Drive  ¶ 

Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive. Transfer the hard drive retaining posts to your new hard drive.

Schritt 1 Hard Drive  ¶ 

  • Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive.

  • Transfer the hard drive retaining posts to your new hard drive.

  • If desired, transfer the pull tab over to your new hard drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

  • If you upgraded your EFI Firmware ROM you can also perform an internet recovery.