Zum Hauptinhalt wechseln
Hilfe

APS Tech 101629 Channel Switch Replacement

Grammatikfehler

Grammatikfehler

Wecke den Deutschlehrer in dir und hilf, die Grammatik dieser Anleitung zu verbessern!

Fehler in den Markups

Fehler in den Markups

Diese Anleitung benötigt bessere Markups. Hilf aus, indem du sie korrigierst oder einige Markup-Anmerkungen erstellst.

This guide will summarize how to open the device and replace the channel switch.

  • Autor: Alexis Weckel
  • Geschätzte Zeit: 15 Minuten
  • Schwierigkeitsgrad: Moderat

This repair guide will take you through the steps to removing and replacing the channel switch of your APS Tech 101629 CD-Drive. This can be quickly removed and easily replaced.

First the external casing will need to be removed.

Schritt 1 Channel Switch  ¶ 

Find the conjoined ID cable wires that are colored black, orange, and yellow, and disconnect it from the white portion. Make sure to lift the white portion of the connection first.

Schritt 1 Channel Switch  ¶ 

  • Find the conjoined ID cable wires that are colored black, orange, and yellow, and disconnect it from the white portion.

  • Make sure to lift the white portion of the connection first.

Schritt 2  ¶ 

At this point, the fan is loose and can be easily moved but not disconnected. Using the spudger, depress the pressure holders at all four corners of the fan. Take out the fan and its cords, by pulling it outward from its cavity within the device.

Schritt 2  ¶ 

  • At this point, the fan is loose and can be easily moved but not disconnected.

  • Using the spudger, depress the pressure holders at all four corners of the fan.

  • Take out the fan and its cords, by pulling it outward from its cavity within the device.