Zum Hauptinhalt wechseln
Hilfe

Sony VAIO PCG-933A Keyboard Replacement

Unklarer Text

Unklarer Text

Teile des Textes dieser Anleitung sind verwirrend, doppelt oder vom Thema abweichend. Kläre das, indem du sie bearbeitest!

Replace your face, get a new keyboard.

  • Autor: Sara Lillard
  • Geschätzte Zeit: 15 Minuten
  • Schwierigkeitsgrad: Moderat

This guide shows the repairing and replacing of the keyboard.

Abschnitte
Werkzeuge

Schritt 1 Keyboard  ¶ 

Remove the four 16mm Phillips screws bordering the edge of the laptop, indicated here.

Schritt 1 Keyboard  ¶ 

  • Remove the four 16mm Phillips screws bordering the edge of the laptop, indicated here.

Schritt 2  ¶ 

Remove the 4mm Phillips screw on the right rear side of the laptop next to the audio ports. This will release the speaker grille.

Schritt 2  ¶ 

  • Remove the 4mm Phillips screw on the right rear side of the laptop next to the audio ports.

  • This will release the speaker grille.

Schritt 3  ¶ 

Flip the computer back over and open the screen.

Schritt 3  ¶ 

  • Flip the computer back over and open the screen.

Schritt 4  ¶ 

Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward.  The grille will still be connected by a white electrical strip. Carefully pull out the white electrical strip. Carefully pull out the white electrical strip.

Schritt 4  ¶ 

  • Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward. The grille will still be connected by a white electrical strip.

  • Carefully pull out the white electrical strip.

Schritt 5  ¶ 

Remove the 4mm Phillips screw in the center (located to the left of the green strip). Carefully pull the green strip straight up to disconnect it. The keyboard can now be removed.

Schritt 5  ¶ 

  • Remove the 4mm Phillips screw in the center (located to the left of the green strip).

  • Carefully pull the green strip straight up to disconnect it.

  • The keyboard can now be removed.