Zum Hauptinhalt wechseln
Hilfe

HP Pavilion zd8000 Screen Replacement

  • Autor: Allie Menard
  • Geschätzte Zeit: 15 Minuten
  • Schwierigkeitsgrad: Moderat
Abschnitte

Schritt 1 Screen  ¶ 

Close the lid and rotate the laptop so that the vents are facing you. Unscrew the two 8mm Philips screws below the hinges.

Schritt 1 Screen  ¶ 

  • Close the lid and rotate the laptop so that the vents are facing you.

  • Unscrew the two 8mm Philips screws below the hinges.

Schritt 2  ¶ 

Carefully rotate the laptop 90 degrees counter-clockwise and open the screen. Pull on the black tab with the HP service sticker to unplug the display from the motherboard.

Schritt 2  ¶ 

  • Carefully rotate the laptop 90 degrees counter-clockwise and open the screen.

  • Pull on the black tab with the HP service sticker to unplug the display from the motherboard.

Schritt 3  ¶ 

Using tweezers, remove the black cable from the hole leading to the WiFi enclosure. Pull gently to remove the black and grey cables from the case.

Schritt 3  ¶ 

  • Using tweezers, remove the black cable from the hole leading to the WiFi enclosure.

  • Pull gently to remove the black and grey cables from the case.

  • Check the surface beneath the laptop to ensure the cables do not catch on anything when you flip the laptop over.

Schritt 4  ¶ 

Using tweezers, pull the black cable towards the display and through the hole in the casing. Using tweezers, pull the black cable towards the display and through the hole in the casing.

Schritt 4  ¶ 

  • Using tweezers, pull the black cable towards the display and through the hole in the casing.

Schritt 5  ¶ 

Unscrew the two 8mm Philips screws that attach the hinge to the laptop's display. Lift the screen upwards to detach it from the laptop. Lift the screen upwards to detach it from the laptop.

Schritt 5  ¶ 

  • Unscrew the two 8mm Philips screws that attach the hinge to the laptop's display.

  • Lift the screen upwards to detach it from the laptop.