Zum Hauptinhalt wechseln
Hilfe

Amazon Fire HD 10 Screen Replacement

Follow this guide to replace your screen and digitizer.

  • Autor: Jaie Hillery
  • Geschätzte Zeit: 10 Minuten
  • Schwierigkeitsgrad: Moderat

Before you begin, make sure the device is off. The screen and digitizer will come off as one connected component.

Schritt 1 Screen  ¶ 

Avoid prying near bottom right hand side due to LCD Connector Use a plastic opening tool to pry the screen up in the right hand corner. Use a plastic opening tool to pry the screen up in the right hand corner.

Schritt 1 Screen  ¶ 

  • Avoid prying near bottom right hand side due to LCD Connector

  • Use a plastic opening tool to pry the screen up in the right hand corner.

Schritt 2  ¶ 

Do not completely remove the screen yet as there is a ZIF connector connected.

Schritt 2  ¶ 

  • Do not completely remove the screen yet as there is a ZIF connector connected.

  • Lift the screen and digitizer from the case.

  • You may need to use some force due to the glue.

Schritt 3  ¶ 

Be mindful of the ZIF connector. Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

Schritt 3  ¶ 

  • Be mindful of the ZIF connector.

  • Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

Schritt 4  ¶ 

Remove the screen and digitizer from the case completely.

Schritt 4  ¶ 

  • Remove the screen and digitizer from the case completely.