Removing Canon PowerShot A550 Front and Back Covers
How to remove and replace the front and back covers of the Canon PowerShot A550.
- Autor: Shaelyn Thomas
- Geschätzte Zeit: 5 - 10 Minuten
- Schwierigkeitsgrad: Einfach
This guide will give a step by step procedure of how to remove and replace the front and back covers of the Canon PowerShot A550.
Bette diese Anleitung ein
Wähle eine Größe und kopiere den nachfolgenden Code, um diese Anleitung als kleines Widget auf deiner Seite / in deinem Forum einzubetten.
Schritt 1 — Front and Back Covers ¶
Unscrew a total of 6 4.45 mm phillips head screws using a #00 phillips head screwdriver.
There are 2 screws on the left side (when looking at the front of the camera).
There are 3 screws on the bottom
There is 1 screw on the right side
Schritt 2 ¶
Turn to the bottom of the camera.
Open the memory card cover by sliding the "CARD/BATT." button up, and then pulling the cover to the left.
Schritt 3 ¶
This is what the SD card/battery compartment looks like when opened.
Remove one 4.45mm phillips head screw from the SD card/battery compartment using a #00 phillips head screwdriver.
Schritt 4 ¶
Gently remove the front cover away from the camera body.
Schritt 5 ¶
The camera should look like this once the front cover is removed.
Schritt 6 ¶
Start from the battery compartment and remove the back cover.
Remove the connecting ribbon from the body of the camera using a pair of tweezers.
Schritt 7 ¶
Once the ribbon connecting the back cover is removed, the back of the camera body should look like this.