Zum Hauptinhalt wechseln
Hilfe

Samsung Fascinate Speaker Replacement

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

Benötigt Bessere Bilder

Benötigt Bessere Bilder

Schönere Fotos werden diese Anleitung verbessern. Trage dazu bei, indem du die Alten bearbeitest oder Neue aufnimmst und hochlädst!

How to install the speaker on the Samsung Galaxy S SCH-i500.

  • Autor: Kevin Carlson
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Moderat

This guide will show you how to disassemble the Samsung Galaxy S so that you can gain access to the speaker.

Abschnitte

Schritt 1 Speaker  ¶ 

Use the screwdriver to unscrew each of the 6 silver screws holding the main case to the LCD touchscreen. If the screws are stuck, use the spudger to pry them out. If the screws are stuck, use the spudger to pry them out.

Schritt 1 Speaker  ¶ 

  • Use the screwdriver to unscrew each of the 6 silver screws holding the main case to the LCD touchscreen.

  • If the screws are stuck, use the spudger to pry them out.

Schritt 2  ¶ 

Use the plastic opening tool to pry the main case from the LCD touchscreen. Insert the thin edge of the plastic opening tool into the groove between the silver edge and black edge. Run the tool all the way around the edge of the phone until you hear each of the clips detach.

Schritt 2  ¶ 

  • Use the plastic opening tool to pry the main case from the LCD touchscreen.

  • Insert the thin edge of the plastic opening tool into the groove between the silver edge and black edge.

  • Run the tool all the way around the edge of the phone until you hear each of the clips detach.

Schritt 3  ¶ 

Once the clips are detached, separate the main case from the LCD touchscreen. Once the clips are detached, separate the main case from the LCD touchscreen. Once the clips are detached, separate the main case from the LCD touchscreen.

Schritt 3  ¶ 

  • Once the clips are detached, separate the main case from the LCD touchscreen.

Schritt 4  ¶ 

Use the spudger to pry out the grey rubber rectangular component from the main case. Use the spudger to pry out the grey rubber rectangular component from the main case. Use the spudger to pry out the grey rubber rectangular component from the main case.

Schritt 4  ¶ 

  • Use the spudger to pry out the grey rubber rectangular component from the main case.

Schritt 5  ¶ 

Use the spudger to pry along the groove between the speaker and the main case. Once the speaker is unclipped it should pop out easily. Once the speaker is unclipped it should pop out easily.

Schritt 5  ¶ 

  • Use the spudger to pry along the groove between the speaker and the main case.

  • Once the speaker is unclipped it should pop out easily.