Zum Hauptinhalt wechseln
Hilfe

iMac Intel 21.5" EMC 2428 CPU Fan Replacement

Replace the CPU fan in your iMac Intel 21.5" EMC 2428.

  • Autor: Walter Galan
  • Geschätzte Zeit: 2 - 3 Stunden
  • Schwierigkeitsgrad: Schwierig

Replace a broken CPU fan to keep temperatures down.

Abschnitte

Schritt 1 CPU Fan  ¶ 

Remove the two 13 mm T10 Torx screws securing the CPU fan to the outer case.

Schritt 1 CPU Fan  ¶ 

  • Remove the two 13 mm T10 Torx screws securing the CPU fan to the outer case.

Schritt 2  ¶ 

Pull the CPU fan straight up from its mounting pin near the bottom edge of the iMac.

Schritt 2  ¶ 

  • Pull the CPU fan straight up from its mounting pin near the bottom edge of the iMac.

Schritt 3  ¶ 

Being careful not to put too much strain on the left speaker cable, flip the CPU fan over to expose its bottom edge. Use the flat end of a spudger to press down one side of the speaker cable retainer as you use your other hands to slide the speaker cables out of the retainer.

Schritt 3  ¶ 

  • Being careful not to put too much strain on the left speaker cable, flip the CPU fan over to expose its bottom edge.

  • Use the flat end of a spudger to press down one side of the speaker cable retainer as you use your other hands to slide the speaker cables out of the retainer.

  • Remove the CPU fan from the iMac.