Zum Hauptinhalt wechseln
Hilfe

Axess SPBT1031 Red Interface Plate Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Prerequisite Only This guide is for the removal of the red interface plate on the Axess SPBT1031.

Schritt 1 Red Interface Plate  ¶ 

Use metal spudger to remove the mesh speaker covers (the side with the buttons) by wedging the narrow end into the center of the outer edge of the mesh, touching the red plate.

Schritt 1 Red Interface Plate  ¶ 

  • Use metal spudger to remove the mesh speaker covers (the side with the buttons) by wedging the narrow end into the center of the outer edge of the mesh, touching the red plate.

Schritt 2  ¶ 

Use Phillips head PH1 to remove the four 5mm Phillips Head  screws from the red panel (under mesh).

Schritt 2  ¶ 

  • Use Phillips head PH1 to remove the four 5mm Phillips Head screws from the red panel (under mesh).

Schritt 3  ¶ 

If the screws are difficult to remove, use a pair of tweezers to twist and pick them out.

Schritt 3  ¶ 

  • If the screws are difficult to remove, use a pair of tweezers to twist and pick them out.

Schritt 4  ¶ 

Separate the red interface plate from the black face plate by pulling them apart.

Schritt 4  ¶ 

  • Separate the red interface plate from the black face plate by pulling them apart.