Zum Hauptinhalt wechseln
Hilfe

iMac Intel 21.5" Retina 4K Display Assembly Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Replace the display in a 21.5" Retina 4K Late 2015 iMac EMC 2833.

Prereq-only guide to remove the entire display assembly.

Schritt 1 Display Assembly Separation  ¶ 

Lift the display up to a near-vertical position. At this point there is still a strip of adhesive along the bottom of the display that will hold the display to the frame like a hinge. You can loosen this adhesive by working the display up and down a few times.

Schritt 1 Display Assembly Separation  ¶ 

  • Lift the display up to a near-vertical position.

  • At this point there is still a strip of adhesive along the bottom of the display that will hold the display to the frame like a hinge. You can loosen this adhesive by working the display up and down a few times.

Schritt 2  ¶ 

If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip. If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

Schritt 2  ¶ 

  • If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

Schritt 3  ¶ 

Lift the display up from the frame and remove it from the iMac. It may be necessary to slowly lift from one side to peel against the remaining adhesive. Be very careful handling the display—it's big, heavy, and made of glass.

Schritt 3  ¶ 

  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.