Zum Hauptinhalt wechseln
Hilfe

iPad Mini 3 Wi-Fi Front Panel Assembly Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Prereq only for replacing the front panel assembly in an iPad Mini 3

Prerequisite only guide for removing the front panel assembly from an iPad Mini 3.

Werkzeuge

Schritt 1 Front Panel Assembly  ¶ 

Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket. Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket.

Schritt 1 Front Panel Assembly  ¶ 

  • Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket.

Schritt 2  ¶ 

Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case. Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.

Schritt 2  ¶ 

  • Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.

Schritt 3  ¶ 

Lift the digitizer board up to free the last of the adhesive. Lift the digitizer board up to free the last of the adhesive.

Schritt 3  ¶ 

  • Lift the digitizer board up to free the last of the adhesive.

Schritt 4  ¶ 

Lift and remove the front panel assembly from the iPad.

Schritt 4  ¶ 

  • Lift and remove the front panel assembly from the iPad.