Zum Hauptinhalt wechseln
Hilfe

HP ProBook 645 Keyboard Replacement

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

Instructional documentation on Keyboard replacement of keyboard of HP Pro Book 645.

  • Autor: Doug
  • Geschätzte Zeit: 10 - 25 Minuten
  • Schwierigkeitsgrad: Einfach

Schritt 1 Remove 2 screws  ¶ 

Remove the two screws at the two indicated locations with the phillips head screw driver.

Schritt 1 Remove 2 screws  ¶ 

  • Remove the two screws at the two indicated locations with the phillips head screw driver.

Schritt 2 Flip unit over and open lid.  ¶ 

Take a spudger tool and pry the keyboard down toward the mouse pad and up toward you. After you raise the keyboard there are tabs at the bottom. Pull the keyboard away from you, and it will dislodge.

Schritt 2 Flip unit over and open lid.  ¶ 

  • Take a spudger tool and pry the keyboard down toward the mouse pad and up toward you. After you raise the keyboard there are tabs at the bottom. Pull the keyboard away from you, and it will dislodge.

Schritt 3 Ribbon Removal  ¶ 

1. Remove ribbon by flipping the black tab up and gently pulling on the ribbon.

Schritt 3 Ribbon Removal  ¶ 

  • 1. Remove ribbon by flipping the black tab up and gently pulling on the ribbon.

  • 2. This ribbon has no tab, gently pull on until it comes loose. To reinsert. Line it up carefully as not to damage the ribbon, and push gently.