Zum Hauptinhalt wechseln
Hilfe

BlackBerry Curve 8900 Battery Replacement

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

Benötigt Bessere Bilder

Benötigt Bessere Bilder

Schönere Fotos werden diese Anleitung verbessern. Trage dazu bei, indem du die Alten bearbeitest oder Neue aufnimmst und hochlädst!

Replacing a dead battery in a Blackberry Curve 8900.

  • Autor: Renae Bishop
  • Geschätzte Zeit: 30 Sekunden - 2 Minuten
  • Schwierigkeitsgrad: Einfach

Few tools are required to do this.

A small plastic pry tool or even a fingernail is sufficient. Working area surface should be clean and dry with adequate lighting.

Immediately wash hands after handling the battery and completing the process. Discard the dead battery properly.

Schritt 1 Battery  ¶ 

Pry off the back and separate it from the front of the phone case. You will see the battery once the cover is removed.

Schritt 1 Battery  ¶ 

  • Pry off the back and separate it from the front of the phone case. You will see the battery once the cover is removed.

Schritt 2  ¶ 

On both sides of the battery, there is a lighter grey half-circle. This is the best place to use your fingers to gently lift the battery free of the housing. On both sides of the battery, there is a lighter grey half-circle. This is the best place to use your fingers to gently lift the battery free of the housing.

Schritt 2  ¶ 

  • On both sides of the battery, there is a lighter grey half-circle. This is the best place to use your fingers to gently lift the battery free of the housing.