Zum Hauptinhalt wechseln
Hilfe

Linksys WRT54G Motherboard Component Replacement

This guide demonstrates how to desolder and remove a functional component for replacement.

  • Autor: Nicole C
  • Geschätzte Zeit: 20 - 30 Minuten
  • Schwierigkeitsgrad: Schwierig

If, after reading through this guide, you are still in need of assistance, please refer back to the device page or the troubleshooting page.

Abschnitte

Schritt 1 Motherboard Component  ¶ 

Obtain a desoldering wick (Desoldering Braid). Plug in soldering iron and allow to heat. For soldering information, refer to the iFixit soldering guide (Wie man Lötverbindungen herstellt und entlötet).

Schritt 1 Motherboard Component  ¶ 

Schritt 2  ¶ 

Identify the functional component which will be removed. Turn the board over so that the pins holding the component in are exposed.

Schritt 2  ¶ 

  • Identify the functional component which will be removed.

  • Turn the board over so that the pins holding the component in are exposed.

Schritt 3  ¶ 

Desolder each pin using the iFixit Soldering Guide (Wie man Lötverbindungen herstellt und entlötet). Gently remove functional component for replacement.

Schritt 3  ¶