Zum Hauptinhalt wechseln
Hilfe

iPhone 4S Dock Connector Cable Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Internal prerequisite.

Internal prerequisite.

Schritt 1 Dock Connector Cable  ¶ 

Remove the following screws securing the dock connector cable cover to the logic board: One 1.5 mm Phillips screw

Schritt 1 Dock Connector Cable  ¶ 

  • Remove the following screws securing the dock connector cable cover to the logic board:

  • One 1.5 mm Phillips screw

  • One 1.2 mm Phillips screw

  • Remove the metal dock connector cable cover.

Schritt 2  ¶ 

Use the edge of a plastic opening tool to pry the dock cable up from its socket on the logic board.

Schritt 2  ¶ 

  • Use the edge of a plastic opening tool to pry the dock cable up from its socket on the logic board.

Schritt 3  ¶ 

Peel the dock connector cable off the adhesive securing it to the logic board and the side of the speaker enclosure.

Schritt 3  ¶ 

  • Peel the dock connector cable off the adhesive securing it to the logic board and the side of the speaker enclosure.

Schritt 4  ¶ 

Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board. De-route the cellular antenna cable out from under the metal fingers attached to the logic board.

Schritt 4  ¶ 

  • Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board.

  • De-route the cellular antenna cable out from under the metal fingers attached to the logic board.