Zum Hauptinhalt wechseln
Hilfe

iPhone 4S Speaker Enclosure Assembly Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Prereq when logic board is removed.

Prereq when logic board is removed.

Schritt 1 Speaker Enclosure Assembly  ¶ 

Remove the two 2.4 mm Phillips screws from the sides of the speaker enclosure assembly.

Schritt 1 Speaker Enclosure Assembly  ¶ 

  • Remove the two 2.4 mm Phillips screws from the sides of the speaker enclosure assembly.

Schritt 2  ¶ 

Remove the small plastic bracket that was installed under the screw closest to the dock connector cable.

Schritt 2  ¶ 

  • Remove the small plastic bracket that was installed under the screw closest to the dock connector cable.

Schritt 3  ¶ 

Remove the speaker enclosure assembly from the iPhone. Before reinstalling the speaker enclosure assembly's screws, be sure the Wi-Fi grounding fingers are installed below the lip in the iPhone's metal case as seen in the second picture.

Schritt 3  ¶ 

  • Remove the speaker enclosure assembly from the iPhone.

  • Before reinstalling the speaker enclosure assembly's screws, be sure the Wi-Fi grounding fingers are installed below the lip in the iPhone's metal case as seen in the second picture.

  • Before reassembly, be sure to clean all metal-to-metal contact points between the grounding fingers of the Wi-Fi antenna and the case of the iPhone with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.