Zum Hauptinhalt wechseln
Hilfe

Canon PowerShot SD1000 Broken Flash Unit Replacement

Grammatikfehler

Grammatikfehler

Wecke den Deutschlehrer in dir und hilf, die Grammatik dieser Anleitung zu verbessern!

Benötigt Bessere Bilder

Benötigt Bessere Bilder

Schönere Fotos werden diese Anleitung verbessern. Trage dazu bei, indem du die Alten bearbeitest oder Neue aufnimmst und hochlädst!

The flash of the Powershot SD1000 is in need of a new flash unit.

Abschnitte

Schritt 1 Broken Flash Unit  ¶ 

Remove the metal frame on the side closest to the flash mechanism. This will  expose the screw securing the flash assembly. Remove the metal frame on the side closest to the flash mechanism. This will  expose the screw securing the flash assembly.

Schritt 1 Broken Flash Unit  ¶ 

  • Remove the metal frame on the side closest to the flash mechanism. This will expose the screw securing the flash assembly.

Schritt 2  ¶ 

Remove the screw securing the flash assembly.

Schritt 2  ¶ 

  • Remove the screw securing the flash assembly.

  • Note: The screw is 2.4mm long.

Schritt 3  ¶ 

Use the spudger to carefully disconnect the flash assembly ribbon from the black connector lock.

Schritt 3  ¶ 

  • Use the spudger to carefully disconnect the flash assembly ribbon from the black connector lock.

Schritt 4  ¶ 

Remove the flash assembly. Note: BE CAREFUL, when handling the flash assembly; touching the capacitor (the black cylinder) could shock you

Schritt 4  ¶ 

  • Remove the flash assembly.

  • Note: BE CAREFUL, when handling the flash assembly; touching the capacitor (the black cylinder) could shock you