Zum Hauptinhalt wechseln
Hilfe

Coby DVD209 Circuit Board for Buttons Replacement

This guide will show you how to instill a new Circuit board for the play/rewind/fastforward/power buttons.

  • Autor: Yufay Chow
  • Geschätzte Zeit: 10 - 20 Minuten
  • Schwierigkeitsgrad: Moderat

Schritt 1 Circuit Board for Buttons  ¶ 

Take the top portion of the DVD player and orient the device as shown in the first picture. Remove the four 0.2" screws circled in red.

Schritt 1 Circuit Board for Buttons  ¶ 

  • Take the top portion of the DVD player and orient the device as shown in the first picture.

  • Remove the four 0.2" screws circled in red.

Schritt 2  ¶ 

Losen the screw circled in red. The screw will not come out of the plastic knob. Turn the plastic knob 90 degrees to the right so that the cable comes out freely.

Schritt 2  ¶ 

  • Losen the screw circled in red.

  • The screw will not come out of the plastic knob.

  • Turn the plastic knob 90 degrees to the right so that the cable comes out freely.