Zum Hauptinhalt wechseln
Hilfe

BLU Studio 5.0 S II Motherboard Replacement

Easy to follow instructions to replace BLU Studio Motherboard.

  • Autor: Aaron Isaacs
  • Geschätzte Zeit: 30 - 45 Minuten
  • Schwierigkeitsgrad: Schwierig

You may be experiencing issues with your BLU Studio 5.0 S II motherboard (i.e power button and/or headphone jack). Replacing the motherboard of this phone isn't terribly difficult, luckily this motherboard replacement guide is very clear. We hope this guide helps you quickly replace your motherboard. Good luck and let us know how we can improve this guide.

Abschnitte
Werkzeuge

Schritt 1 Motherboard  ¶ 

Remove the microSD and SIM card. Gently tug on the microSD and SIM card to slide them out of their insert. Remove the microSD and SIM card. Gently tug on the microSD and SIM card to slide them out of their insert.

Schritt 1 Motherboard  ¶ 

  • Remove the microSD and SIM card. Gently tug on the microSD and SIM card to slide them out of their insert.

Schritt 2  ¶ 

Locate the 5 black 3.5mm screws and the 1 3.5mm silver screw on the top back plate. Remove the 6 3.5mm screws by using a Phillips #00 screwdriver.

Schritt 2  ¶ 

  • Locate the 5 black 3.5mm screws and the 1 3.5mm silver screw on the top back plate.

  • Remove the 6 3.5mm screws by using a Phillips #00 screwdriver.

Schritt 3  ¶ 

Remove the inner top back black plate. Remove the inner top back black plate.

Schritt 3  ¶ 

  • Remove the inner top back black plate.

Schritt 4  ¶ 

Locate the 2 black 3.5mm screws on the motherboard. Remove the black 3.5 mm screws using a Phillips #00 screwdriver.

Schritt 4  ¶ 

  • Locate the 2 black 3.5mm screws on the motherboard.

  • Remove the black 3.5 mm screws using a Phillips #00 screwdriver.

Schritt 5  ¶ 

Locate the 2 orange ribbons on opposite sides. Carefully remove the two ribbon cables using tweezers. Gently rock the cable back and forth equally from both sides to not damage the pins.

Schritt 5  ¶ 

  • Locate the 2 orange ribbons on opposite sides.

  • Carefully remove the two ribbon cables using tweezers.

  • Gently rock the cable back and forth equally from both sides to not damage the pins.

Schritt 6  ¶ 

Gently rock the plastic opening tool back and forth until the motherboard releases from the phone. Adhesion, identified with red circles, bonds the motherboard to the chassis. This may require extra effort to lift off from back of phone.

Schritt 6  ¶ 

  • Gently rock the plastic opening tool back and forth until the motherboard releases from the phone.

  • Adhesion, identified with red circles, bonds the motherboard to the chassis. This may require extra effort to lift off from back of phone.

Schritt 7  ¶ 

Follow the wire from the motherboard. Remove the black lining covering the wire.

Schritt 7  ¶ 

  • Follow the wire from the motherboard.

  • Remove the black lining covering the wire.

Schritt 8  ¶ 

Locate the 5 black screws on inner black lower plate. Remove the black 3.5 mm screws using a Phillips #00 screwdriver.

Schritt 8  ¶ 

  • Locate the 5 black screws on inner black lower plate.

  • Remove the black 3.5 mm screws using a Phillips #00 screwdriver.

Schritt 9  ¶ 

Remove the bottom inner back plate. Remove the bottom inner back plate.

Schritt 9  ¶ 

  • Remove the bottom inner back plate.

Schritt 10  ¶ 

Holding the cable with the removal tool, gently pull in the direction of the cable to remove the connector from its socket. Gently rock the cable back and forth equally from both sides to not damage the pins.

Schritt 10  ¶ 

  • Holding the cable with the removal tool, gently pull in the direction of the cable to remove the connector from its socket.

  • Gently rock the cable back and forth equally from both sides to not damage the pins.

Schritt 11  ¶ 

Remove the whole motherboard.

Schritt 11  ¶ 

  • Remove the whole motherboard.

  • The Motherboard contains the headphone jack and the power button.