Zum Hauptinhalt wechseln
Hilfe

HTC Hero Motherboard Replacement

Benötigt Mehr Bilder

Benötigt Mehr Bilder

Einige Bilder mehr würden die Vorgehensweise in dieser Anleitung deutlich klarer machen.

Benötigt Bessere Bilder

Benötigt Bessere Bilder

Schönere Fotos werden diese Anleitung verbessern. Trage dazu bei, indem du die Alten bearbeitest oder Neue aufnimmst und hochlädst!

This guide will illustrate the appropriate steps necessary to remove a damaged mother board and replace it with a functioning unit.

Schritt 1 Motherboard  ¶ 

Release the two ribbon cables using a plastic opening tool. Gently pry up the pop connectors used to attach the ribbon cables to the motherboard.

Schritt 1 Motherboard  ¶ 

  • Release the two ribbon cables using a plastic opening tool.

  • Gently pry up the pop connectors used to attach the ribbon cables to the motherboard.

Schritt 2  ¶ 

Remove the two screws located at the bottom left and right of the motherboard using a small Phillips screwdriver. Remove the two screws located at the bottom left and right of the motherboard using a small Phillips screwdriver.

Schritt 2  ¶ 

  • Remove the two screws located at the bottom left and right of the motherboard using a small Phillips screwdriver.

Schritt 3  ¶ 

Gently lift the motherboard out of the front enclosure once the screws are removed. Gently lift the motherboard out of the front enclosure once the screws are removed.

Schritt 3  ¶ 

  • Gently lift the motherboard out of the front enclosure once the screws are removed.