Zum Hauptinhalt wechseln
Hilfe

PlayStation Vita Motherboard Replacement

Empfohlene Anleitung

Empfohlene Anleitung

Diese Anleitung wird von den iFixit-Mitarbeitern als außergewöhnlich gut eingestuft.

Install the motherboard on the PlayStation Vita.

This guide takes you through the process of installing the motherboard.

Schritt 1 Motherboard  ¶ 

Using the pointy end of a spudger, pry up and release the GPS antenna cable from the motherboard. Remove the GPS antenna cable.

Schritt 1 Motherboard  ¶ 

  • Using the pointy end of a spudger, pry up and release the GPS antenna cable from the motherboard.

  • Remove the GPS antenna cable.

Schritt 2  ¶ 

Release the camera flex cable socket by prying up on the tab with a spudger. Release the camera flex cable socket by prying up on the tab with a spudger.

Schritt 2  ¶ 

  • Release the camera flex cable socket by prying up on the tab with a spudger.

Schritt 3  ¶ 

Using a spudger, gently pry up on the camera. Work your way under the camera and along the camera flex cable, using the spudger to peel away the adhesive, freeing the camera.

Schritt 3  ¶ 

  • Using a spudger, gently pry up on the camera.

  • Work your way under the camera and along the camera flex cable, using the spudger to peel away the adhesive, freeing the camera.

Schritt 4  ¶ 

Carefully lift and remove the camera, sliding the flex cable out of the open connector socket. Carefully lift and remove the camera, sliding the flex cable out of the open connector socket.

Schritt 4  ¶ 

  • Carefully lift and remove the camera, sliding the flex cable out of the open connector socket.

Schritt 5  ¶ 

Using a Phillips #00 screwdriver, remove the 6.3mm screw beneath the camera. Lift and remove the metal camera bracket.

Schritt 5  ¶ 

  • Using a Phillips #00 screwdriver, remove the 6.3mm screw beneath the camera.

  • Lift and remove the metal camera bracket.

Schritt 6  ¶ 

With the help of a spudger, lift and release the tab on the blue flex cable socket. With the help of a spudger, lift and release the tab on the blue flex cable socket.

Schritt 6  ¶ 

  • With the help of a spudger, lift and release the tab on the blue flex cable socket.

Schritt 7  ¶ 

Using tweezers, gently pull the blue power flex cable out of the socket; rest it out of the way. Using tweezers, gently pull the blue power flex cable out of the socket; rest it out of the way.

Schritt 7  ¶ 

  • Using tweezers, gently pull the blue power flex cable out of the socket; rest it out of the way.

Schritt 8  ¶ 

Using a Phillips #00 screwdriver, remove the two pink, 4.4mm screws securing the motherboard.

Schritt 8  ¶ 

  • Using a Phillips #00 screwdriver, remove the two pink, 4.4mm screws securing the motherboard.

Schritt 9  ¶ 

Gently peel the rubber tab of the game port cover off the plastic casing pins. Remove the game port cover. Remove the game port cover.

Schritt 9  ¶ 

  • Gently peel the rubber tab of the game port cover off the plastic casing pins.

  • Remove the game port cover.

Schritt 10  ¶ 

Gently peel the rubber tab of the accessory port cover off the plastic casing pins. Remove the accessory port cover. Remove the accessory port cover.

Schritt 10  ¶ 

  • Gently peel the rubber tab of the accessory port cover off the plastic casing pins.

  • Remove the accessory port cover.

Schritt 11  ¶ 

Starting at the upper right hand corner, use a spudger to gently lift the motherboard out of the casing assembly. The motherboard is still attached to the casing by a connector on the back of the motherboard. Do not pull the motherboard all the way out, or you may damage the connector. The motherboard is still attached to the casing by a connector on the back of the motherboard. Do not pull the motherboard all the way out, or you may damage the connector.

Schritt 11  ¶ 

  • Starting at the upper right hand corner, use a spudger to gently lift the motherboard out of the casing assembly.

  • The motherboard is still attached to the casing by a connector on the back of the motherboard. Do not pull the motherboard all the way out, or you may damage the connector.

Schritt 12  ¶ 

Lift the motherboard out and identify the OLED connector still attaching the motherboard to the casing. Holding the Vita on its side, use a spudger to gently pry off the OLED connector from the motherboard. Be sure to hold the motherboard while you release the connector as this will free the motherboard. If you are not holding the motherboard, it will fall.

Schritt 12  ¶ 

  • Lift the motherboard out and identify the OLED connector still attaching the motherboard to the casing.

  • Holding the Vita on its side, use a spudger to gently pry off the OLED connector from the motherboard.

  • Be sure to hold the motherboard while you release the connector as this will free the motherboard. If you are not holding the motherboard, it will fall.

Schritt 13  ¶ 

Completely separate the motherboard from the case. Remove the case.

Schritt 13  ¶ 

  • Completely separate the motherboard from the case. Remove the case.

Schritt 14  ¶ 

Starting at the right side, gently lift and remove the black casing that once held the camera. Starting at the right side, gently lift and remove the black casing that once held the camera. Starting at the right side, gently lift and remove the black casing that once held the camera.

Schritt 14  ¶ 

  • Starting at the right side, gently lift and remove the black casing that once held the camera.

Schritt 15  ¶ 

Using a spudger, release the tab on the ZIF connector located above the two screw posts where the wireless card once was. Using a spudger, release the tab on the ZIF connector located above the two screw posts where the wireless card once was.

Schritt 15  ¶ 

  • Using a spudger, release the tab on the ZIF connector located above the two screw posts where the wireless card once was.

Schritt 16  ¶ 

Gently pull the flex cable out of the ZIF connector, and remove it. Gently pull the flex cable out of the ZIF connector, and remove it. Gently pull the flex cable out of the ZIF connector, and remove it.

Schritt 16  ¶ 

  • Gently pull the flex cable out of the ZIF connector, and remove it.

Schritt 17  ¶ 

Release the tab on the large ZIF connector on the right side of the motherboard by lifting the tab with a spudger. Release the tab on the large ZIF connector on the right side of the motherboard by lifting the tab with a spudger.

Schritt 17  ¶ 

  • Release the tab on the large ZIF connector on the right side of the motherboard by lifting the tab with a spudger.

Schritt 18  ¶ 

Gently pull the flex cable out of the ZIF connector, and remove it. Gently pull the flex cable out of the ZIF connector, and remove it.

Schritt 18  ¶ 

  • Gently pull the flex cable out of the ZIF connector, and remove it.

Schritt 19  ¶ 

Using a spudger, release the small ZIF connector on the right side of the motherboard. Using a spudger, release the small ZIF connector on the right side of the motherboard.

Schritt 19  ¶ 

  • Using a spudger, release the small ZIF connector on the right side of the motherboard.

Schritt 20  ¶ 

Gently pull the flex cable out of the small ZIF connector, and remove it. Gently pull the flex cable out of the small ZIF connector, and remove it. Gently pull the flex cable out of the small ZIF connector, and remove it.

Schritt 20  ¶ 

  • Gently pull the flex cable out of the small ZIF connector, and remove it.

Schritt 21  ¶ 

Flip the motherboard over. With the help of a spudger, pry up and release the tab of the rear camera flex cable connector.

Schritt 21  ¶ 

  • Flip the motherboard over.

  • With the help of a spudger, pry up and release the tab of the rear camera flex cable connector.

Schritt 22  ¶ 

Gently pull the rear camera out of the connector and remove it. Gently pull the rear camera out of the connector and remove it. Gently pull the rear camera out of the connector and remove it.

Schritt 22  ¶ 

  • Gently pull the rear camera out of the connector and remove it.

Schritt 23  ¶ 

The motherboard remains.

Schritt 23  ¶ 

  • The motherboard remains.