Zum Hauptinhalt wechseln
Hilfe

Canon EOS Rebel G Back Panel Latch Replacement

How to replace faulty back panel latch.

  • Autor: Zach
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Moderat

This guide teaches how to to install the back panel latch on your camera.

Abschnitte
Werkzeuge
Relevante Ersatzteile

Schritt 1 Back Panel Latch  ¶ 

Using a 00 Phillips screw driver, unscrew the two screws located on the side of the camera.

Schritt 1 Back Panel Latch  ¶ 

  • Using a 00 Phillips screw driver, unscrew the two screws located on the side of the camera.

  • Two 4.3 mm Phillips screws

Schritt 2  ¶ 

Open the back panel by pushing the locking latch up.

Schritt 2  ¶ 

  • Open the back panel by pushing the locking latch up.

  • Lift the latch cover off of the camera body.

Schritt 3  ¶ 

Slide the side latch (for the back door) up and then lift straight away from the camera body.

Schritt 3  ¶ 

  • Slide the side latch (for the back door) up and then lift straight away from the camera body.

  • Sometimes the latch will detach while pushing it up.