Zum Hauptinhalt wechseln
Hilfe

Canon EOS Rebel G Top Panel Replacement

Removing the top panel of device.

  • Autor: Zach
  • Geschätzte Zeit: 10 - 20 Minuten
  • Schwierigkeitsgrad: Schwierig

This guide shows you how to install the top panel of the camera.

Schritt 1 Top Panel  ¶ 

Turn Camera over.

Schritt 1 Top Panel  ¶ 

  • Turn Camera over.

  • Using a #00 Phillips screw driver, unscrew the two 4.9 mm Phillips screws located on either side of the viewfinder.

Schritt 2  ¶ 

Using a #00 Phillips screw driver, unscrew the one 5.7 mm Phillips screw located next to the LCD screen.

Schritt 2  ¶ 

  • Using a #00 Phillips screw driver, unscrew the one 5.7 mm Phillips screw located next to the LCD screen.

Schritt 3  ¶ 

Lay the camera on its back.

Schritt 3  ¶ 

  • Lay the camera on its back.

  • Unsolder the flash connection from the motherboard as noted by the blue circle.

Schritt 4  ¶ 

Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera. Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera. Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera.

Schritt 4  ¶ 

  • Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera.