Zum Hauptinhalt wechseln
Hilfe

PowerBook G3 Wallstreet Display Replacement

Replace the display on a PowerBook G3 Wallstreet.

  • Autor: iRobot
  • Schwierigkeitsgrad: Moderat

Changing the display assembly isn't too difficult. There are three display sizes and they're interchangeable.

Abschnitte
Dateien

Schritt 1 Display  ¶ 

Disconnect the orange display data cable on the left side of the computer. Grasp the cable near the connector and pull directly up.

Schritt 1 Display  ¶ 

  • Disconnect the orange display data cable on the left side of the computer. Grasp the cable near the connector and pull directly up.

Schritt 2  ¶ 

Disconnect the orange display inverter cable on the right side of the computer. Grasp the cable near the connector and pull directly up.

Schritt 2  ¶ 

  • Disconnect the orange display inverter cable on the right side of the computer. Grasp the cable near the connector and pull directly up.

  • Make sure that both cables are free from the plastic casing before proceeding to the next step.

Schritt 3  ¶ 

Turn the laptop around so that its back faces you.

Schritt 3  ¶ 

  • Turn the laptop around so that its back faces you.

  • Open the port door located at the back of the laptop.

  • Remove the four black T8 Torx screws.

Schritt 4  ¶ 

Turn the laptop back around so that the screen faces you.

Schritt 4  ¶ 

  • Turn the laptop back around so that the screen faces you.

  • Adjust the display so that it is in a vertical position.

  • Hold the display on both sides and pull directly up until its hinges are free of their mounts

Schritt 5  ¶ 

Your laptop should look like this.

Schritt 5  ¶ 

  • Your laptop should look like this.