Zum Hauptinhalt wechseln
Hilfe

Plantronics CS50 Headset Motherboard Replacement

Replace a burned out headset motherboard.

  • Autor: Joe
  • Geschätzte Zeit: 15 - 30 Minuten
  • Schwierigkeitsgrad: Schwierig

Use this guide to replace your headset's motherboard

Abschnitte
Werkzeuge

Schritt 1 Motherboard  ¶ 

Using a blow dryer or a heat gun, heat the crevice to melt the adhesive between the plastic covers. Using a plastic opening tool, prop open the edges. Gently pull the black speaker casing up to remove it.

Schritt 1 Motherboard  ¶ 

  • Using a blow dryer or a heat gun, heat the crevice to melt the adhesive between the plastic covers.

  • Using a plastic opening tool, prop open the edges.

  • Gently pull the black speaker casing up to remove it.

Schritt 2  ¶ 

Use the heat gun or blow dryer to melt the glue that connects the wires to the headset's motherboard. The wires should come off as they are not soldered to the motherboard.

Schritt 2  ¶ 

  • Use the heat gun or blow dryer to melt the glue that connects the wires to the headset's motherboard.

  • The wires should come off as they are not soldered to the motherboard.