Zum Hauptinhalt wechseln
Hilfe

Retina MacBook 2016 USB-C Port Replacement

Replace a loose, worn, or failed USB-C port in the Retina MacBook 2016.

  • Autor: Adam O'Camb
  • Geschätzte Zeit: 30 Minuten - 1 Stunde
  • Schwierigkeitsgrad: Moderat

The USB-C port on your Retina MacBook 2016 is the only port besides the headphone jack, and may suffer wear or damage over time. Use this guide to replace it.

Schritt 1 USB-C Port  ¶ 

Remove two 2.5 mm Phillips #00 screws securing the USB-C port.

Schritt 1 USB-C Port  ¶ 

  • Remove two 2.5 mm Phillips #00 screws securing the USB-C port.

Schritt 2  ¶ 

Use tweezers to lift the USB-C port just over the hinge screws. Slide the port out and up over the display hinge to remove it. There's very little clearance when removing and installing the USB-C port. If there's not enough room, don't force it. Try removing the display hinge screws and moving the hinges for additional clearance, if necessary.

Schritt 2  ¶ 

  • Use tweezers to lift the USB-C port just over the hinge screws.

  • Slide the port out and up over the display hinge to remove it.

  • There's very little clearance when removing and installing the USB-C port. If there's not enough room, don't force it. Try removing the display hinge screws and moving the hinges for additional clearance, if necessary.