Zum Hauptinhalt wechseln
Hilfe

Nexus 7 Motherboard Assembly Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Prerequisite for removing the motherboard assembly

A faulty motherboard can lead to a myriad of performance issues. Use this guide to help you replace a damaged or malfunctioning motherboard in the Nexus 7.

Schritt 1 Motherboard Assembly  ¶ 

Carefully peel back the adhesive tape covering the I/O board ribbon cable socket on the motherboard. Carefully peel back the adhesive tape covering the I/O board ribbon cable socket on the motherboard.

Schritt 1 Motherboard Assembly  ¶ 

  • Carefully peel back the adhesive tape covering the I/O board ribbon cable socket on the motherboard.

Schritt 2  ¶ 

Use the tip of a spudger to carefully flip up the retaining flap on the I/O data ribbon cable ZIF socket. Make sure you are flipping up the retaining flap, not the socket itself.

Schritt 2  ¶ 

  • Use the tip of a spudger to carefully flip up the retaining flap on the I/O data ribbon cable ZIF socket.

  • Make sure you are flipping up the retaining flap, not the socket itself.

  • Use the tip of a spudger to pull the I/O data ribbon cable straight out of its socket.

Schritt 3  ¶ 

Peel back the adhesive tape covering the display and digitizer cable sockets.

Schritt 3  ¶ 

  • Peel back the adhesive tape covering the display and digitizer cable sockets.

  • It is not necessary to completely remove the adhesive, but it is helpful to fold it back on itself to get it out of the way.

Schritt 4  ¶ 

Use the flat end of a spudger to pry the display data cable straight up off its socket on the motherboard.

Schritt 4  ¶ 

  • Use the flat end of a spudger to pry the display data cable straight up off its socket on the motherboard.

Schritt 5  ¶ 

Use the flat end of a spudger to carefully flip up the retaining flaps on the digitizer ribbon cable ZIF sockets. Make sure you are flipping up the retaining flaps, not the sockets themselves. Use the tip of a spudger to pull the digitizer ribbon cable straight out of its socket.

Schritt 5  ¶ 

  • Use the flat end of a spudger to carefully flip up the retaining flaps on the digitizer ribbon cable ZIF sockets.

  • Make sure you are flipping up the retaining flaps, not the sockets themselves.

  • Use the tip of a spudger to pull the digitizer ribbon cable straight out of its socket.

Schritt 6  ¶ 

Use the tip of a spudger to remove the warranty seal stickers. Use the tip of a spudger to remove the warranty seal stickers.

Schritt 6  ¶ 

  • Use the tip of a spudger to remove the warranty seal stickers.

Schritt 7  ¶ 

Remove the following screws securing the motherboard to the metal frame:

Schritt 7  ¶ 

  • Remove the following screws securing the motherboard to the metal frame:

  • Six 3.25 mm silver Phillips screws

  • One 2.23 mm black Phillips screw

Schritt 8  ¶ 

Carefully lift the motherboard assembly out of the Nexus 7, minding any cables that may get caught. Carefully lift the motherboard assembly out of the Nexus 7, minding any cables that may get caught.

Schritt 8  ¶ 

  • Carefully lift the motherboard assembly out of the Nexus 7, minding any cables that may get caught.