Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Non-Unibody, Core Duo & Core 2 Duo Processors

491 Fragen Alle anzeigen

Need help locating and jumping power connector (no top case/button)

I've got a 17" Aluminum Core 2 Duo MacBook Pro, well most of one anyway. The case is broken up pretty badly and the top case, keyboard, trackpad, and power button are missing. I've been told it still boots (MB and LCD are intact and everything is still attached) but I can't figure out how to jump the power switch connection on the MB, or even where it is. Can anybody help?

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

iPhone LCD Display Fix Kits

Die Budgetoption, abgedeckt durch unsere lebenslange Garantie.

Kits kaufen

iPhone LCD Display Fix Kits

Reduziere die Reparaturkosten, nicht die Qualität.

Kits kaufen

4 Antworten

Gewählte Lösung

I have a PB 15" alu with the top case removed and i can see two contact points on the logic board with an inscription POWER BUTTON written aside of the contact points. On the PB the contact points are located near the top case cable connector. Look carefully on the logic board to find the contact points or maybe someone here can indicate where exactly they are located.

War diese Antwort hilfreich?

Bewertung 3

Kommentare:

I was looking for an answer for this OP myself and all I find is the connection for the top case. I would have no ides which two pins were the power switch--perhaps you can tell. Ralph

http://s1.guide-images.ifixit.com/igi/CK...

von

Awesome! It is the third pair of pins (from the left). I jumped them with a fork and all is well. Thanks!

von

Glad it worked. Ralph

von

Einen Kommentar hinzufügen

Would this work on a mid2009 Macbook Pro A1278? If so, where might i find the two pins on that motherboard, it looks completely different!

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Here is a MacBook Pro 15 inch Early 2008

http://img.skitch.com/20120104-bb8d3xaut...

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Derek -

It's at the end of the ribbon cable that connects the keyboard/trackpad skin. The two leads for the power button will be somewhere along that ribbon - jump each pair with a paper clip until you get the right one. And you needn't worry about shorting anything out if you hit the 'wrong' pins. At least not along that connector...

- Joe

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Joe Capraro wird auf ewig dankbar sein.
Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 8

Letzten 30 Tage: 17

Insgesamt: 8,853