Repariere deine Sachen Community Store

Zweite iPhone Generation. Modell A1241 mit 8 oder 16 GB Kapazität und schwarzer oder weißer Kunststoff-Rückseite. Die Reparatur ist leichter zu bewerkstelligen als beim iPhone 1. Es werden Schraubendreher, Hebelwerkzeuge und Saugnäpfe benötigt.

1158 Fragen Alle anzeigen

Einstellungen

Repair power (on/off) switch?

I bought my iPhone 3G second-hand by a friend that had 'dropped it in water' (didn't say how much water).

So now the power switch is 'acting funny' (most of the time not working at all). I've taken the iPhone apart and the switch 'looks ok'.

I don't know what to call/describe the switch, but it's in two (three including the externaly visable part) pieces. The 'main [electrical] body', and a small, oval ('half spherical'?) cup.

It works in the manner that the external button part is pressing against 'the cup' which in turn shorts the electrical part.

I was thinking there was ... 'something' in the water that is stopping the connection/short. But the big question is, is there 'more than meets the eye'?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 1
1 Kommentar

Well, I've now replaced the whole button harness and it's still don't work. Don't work in the sence that I can't turn the darn thing off! It's constantly on!

Any idea what can be wrong?

von

Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

Success!! I completely took it apart again. Removed the display assembly (but not separating this), mother board and sync connector. Cleaning everything by blowing clean, compressed air (from a aerosol can) in every nook and cranny and trying to get air in between the mother board and the RF sheilding from all directions, blowing everywhere on the back case and on and around the buttons (that where still in the case) and on all connectors (both on the mother board and on the flex cables). Then assembled everything again, making 100% sure that all the connectors where correctly seated. Turn it back on and loo and behold! Everything works like a charm!! I can turn it on and off, I can enter DFU mode and it doesn't reboot as soon as I unplug the sync cable!! Dang, I'm a happy camper now!! :D PS. Just in case this haden't worked, my next attemt would have been to spray/use some 'electronic cleaning solvent'.

War diese Antwort hilfreich?

Ja Nein
Bewertung 2
Einen Kommentar hinzufügen

Antwort hinzufügen

Turbo Fredriksson wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 7,776